'95 vs '97 Power Distribution Center

Post your technical questions here. If you have a FAQ or a How-to, please let us know so that we can sticky or archive it.
Post Reply
Themicles
Broke 500
Broke 500
Posts: 676
Joined: Sat Sep 17, 2005 12:22 pm
Location: Wolverine Lake, Michigan
Contact:

'95 vs '97 Power Distribution Center

Post by Themicles » Sun Jun 09, 2013 9:46 pm

Just wanted to post my findings in case anyone else was curious or didn't already know.

Internally the PDCs are interchangeable. The missing pins for the Fan relay that a '95 should have are part of the '95's wiring harness, and snap right into place on a '97 PDC. I recently swapped my '97 PDC into my '95.

It is possible and somewhat easy to disassemble the PDC from the wiring harness without cutting wires. Just have to pop plastic clips off, take the red and grey face plates and pop more clips while pulling wires free.
Red 97 SOHC Sedan - Officially became 'the parts car' 2013-6-9
Black 95 DOHC Coupe - Running well...

User avatar
uptownsport
Broke 100
Broke 100
Posts: 163
Joined: Fri Jun 18, 2010 9:41 pm

Re: '95 vs '97 Power Distribution Center

Post by uptownsport » Sun Jun 09, 2013 11:55 pm

:thumbs Up!:

Themicles
Broke 500
Broke 500
Posts: 676
Joined: Sat Sep 17, 2005 12:22 pm
Location: Wolverine Lake, Michigan
Contact:

Re: '95 vs '97 Power Distribution Center

Post by Themicles » Wed May 13, 2015 12:10 am

Nice spam, quoting and modifying the quote... Reported of course.

May want to consider updating the spambot countermeasures.
Red 97 SOHC Sedan - Officially became 'the parts car' 2013-6-9
Black 95 DOHC Coupe - Running well...

Post Reply